| 翻訳と辞書 |
dicing tape
Dicing tape is a backing tape used during wafer dicing, the cutting apart of pieces of semiconductor material following wafer microfabrication. The tape holds the pieces of semiconductor, known as dies, together during the cutting process, mounting them to a thin metal frame. The dies are later removed from the dicing tape further on in the electronics manufacturing process.
Dicing tape can be made of PVC, polyolefin, or polyethylene backing material with an adhesive to hold the dies in place. In some cases dicing tape will have a release liner that will be removed prior to mounting the tape to the backside of the wafer. 〔http://www.lintec-usa.com/di_t.cfm#anc01"Products Dicing Tape." ''LINTEC of AMERICA'' Accessed 11 June 2012〕 It is available in a variety of thicknesses, from 75 〔http://www.semicorp.com/products/standardDicingTape.html "Standard Dicing Tape." ''Semiconductor Equipment Corp.'' Accessed 23 July 2010〕 to 150 micrometers, with a variety of adhesive strengths, designed for various chip sizes and materials. UV tapes are dicing tapes in which the adhesive bond is broken by exposure to UV light after dicing, allowing the adhesive to be stronger during cutting while still allowing clean and easy removal.〔http://www.semiconductortapes.com/products/difference2.html "UV Tape vs Non-UV Tape." ''Semiconductor Tapes and Materials.'' Accessed 23 July 2010〕 UV equipment can range from low power (a few mW/cm2) to high power (more than 200mW/cm2). The higher the power the more complete the cure and the lower adhesion and the less adhesive residue is left behind. .〔http://www.lintec-usa.com/di_uv.cfm
"UV Irradiation Systems." ''LINTEC of AMERICA'' Accessed 12 June 2012〕
==References==
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「dicing tape」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|